We have uncovered this great article about What Would Cause My Electric Water Heater to Stop Working? down the page on the internet and think it made perfect sense to relate it with you here.
Numerous modern-day residences utilize an electric hot water heater for their heating system, due to its convenience as well as simplicity of use. However, similar to any other electric appliances, problems might develop with its use, unexpectedly. It can be really frustrating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't warm sufficient or even too hot. Whatever the instance might be, water heater troubles can be rather nerve-racking. The good news is, we have actually made a listing of possible remedies to your water heater concerns. There are a variety of aspects that could trigger a number of these problems, maybe a problem with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it repaired should not pose excessive of a concern if you adhere to these steps:
Check Your Power Supply:
As fundamental as this may appear, it is very essential. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power trouble. Inspect if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the concern, merely turn it on and off once again. Change any busted or worn-out fuse. Check the appliance with power after these adjustments to see if it's now working.
Examine the Heating Element in the Hot Water Heater:
If it's not a power trouble, after that try checking out your heating element if it is still functioning. Test each of your burner to ensure the problem isn't with any one of them. If any one of them is damaged, replace that component and afterwards check whether the warm water is back on.
Examine Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm sufficient, you may need to inspect the temperature level settings on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open the gain access to panel as well as press the red switch for temperature reset above the thermostat. This ought to aid warm the water. Turn the circuit breaker back on and inspect if the issue has actually been resolved.
Call An Expert:
If after changing all malfunctioning components and also resetting your temperature, the hot water heater still isn't working, you may need to get in touch with a professional plumber for a specialist point of view. The trouble with your heater could be that the hot and cold faucets have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the case may be, an expert plumber would certainly help solve the problem.
Conclusion
Water heater problems are not always major. Much of them result from small problems like a blown fuse or damaged heating element. Replacing the defective parts ought to do the trick. However, if you are still unable to solve the trouble, give a call to your nearest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our section on Hot Water Heater Repair. Thanks a lot for finding the time to read our posting. For those who appreciated our blog posting kindly don't forget to share it. Thank-you for taking the time to read it.
Top-notch fix? Dial!